# Your NOMAE guide

> Get started with the NOMAE gym tracker: charging, pairing, mounting, tracking a workout, and care.

Get started

From box to first set. NOMAE attaches to the moving steel weight stack of a compatible gym machine and connects to the NOMAE app.

NOMAE hardware is still being finalised. These are general setup instructions; follow any updated instructions included with your device.

## 01 / Charge the tracker

Connect NOMAE using a USB-C cable and a standard 5 V USB power source. Disconnect it before attaching it to gym equipment. Never charge the tracker while it is in use on a machine.

## 02 / Open the NOMAE app

[Check NOMAE app availability](https://nomae.com.au/app#availability). On the Home screen, use the tracker setup card, or go to Settings → Tracker. Make sure Bluetooth is enabled on your phone.

## 03 / Pair your tracker

Follow the app's pairing prompts. Keep NOMAE near your phone during setup. Once connected, follow the still-position check and test-rep guidance shown in the app.

## 04 / Attach to a compatible machine

Use a stable, accessible steel surface on the **moving weight stack** of a selectorised gym machine. Clean and dry the contact area, then place the magnetic base flat against the steel. Check that it holds firmly **before** starting a set.

Keep NOMAE away from guide rails, weight-stack pins, pulleys, cables and other pinch points. The tracker must move with the stack without striking anything. If it rocks, slides or can fall off, remove it and choose a safer position. Do not use it on free weights or on a machine without a secure mounting position.

## 05 / Track a set

In the app, start a workout and select your exercise. Use the connected tracker to record the set, perform a controlled test rep, then continue training. After your set, review the recorded reps and save the result to your workout.

## 06 / Check and save your results

Rep counts may need correction. Use the + or − controls on a set result if a rep was missed or added, then confirm the adjustment. You can also log workouts manually when you are not using the tracker.

## Care and safety

- Check the magnetic attachment every time, including after moving the device between machines.
- Keep the device dry. Wipe with a soft dry cloth; avoid soaking it or using harsh cleaners.
- Do not open, crush, puncture, bend or heat the device or its rechargeable battery.
- Stop using or charging it if it becomes unusually hot, swollen, damaged or has an unusual smell. Contact support.
- Keep strong magnets away from implanted medical devices and other items sensitive to magnets, following their manufacturers' safety guidance.
- Always follow your gym's rules and the equipment manufacturer's safety instructions.

## Need help?

If pairing fails, charge the tracker, check Bluetooth and try again from Settings → Tracker. If counting looks wrong, review the set and correct it manually. For other questions, see [Help](https://nomae.com.au/support) or email [support@nomae.com.au](mailto:support@nomae.com.au).

[Explore the app](https://nomae.com.au/app)

[Contact support](https://nomae.com.au/support)

---

Source: https://nomae.com.au/instructions
Site guide for agents: https://nomae.com.au/llms.txt
Contact: hello@nomae.com.au